Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Shenzhen Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-512-21997
Email: [email protected] [email protected] Beijing Tel: +86-10-5753-6809
- 21
Field Name
Explanation
Service Port Settings
Web Server type Specify Web Server Type
–
HTTP or HTTPS
HTTP port
Port for web browser access. Default value is 80. To enhance security, change this
from the default. Setting this port to 0 will disable HTTP access.
Example: The IP address is 192.168.1.70 and the port value is 8090, the accessing
address is http://192.168.1.70:8090.
HTTPS port
Port for HTTPS access. Before using https, an https authentication certification must
be downloaded into the equipment.
Default value is 443. To enhance security, change this from the default.
Telnet port
Port for Telnet access. The default is 23.
RTP port range
start
Set the beginning value for RTP Ports. Ports are dynamically allocated.
RTP port
quantity
Set the maximum quantity of RTP Ports. The default is 200.
Note:
1) Any changes made on this page require a reboot to become active.
2) It is suggested that changes to HTTP Port and Telnet ports be values greater than 1024.Values less
than 1024 are reserved.
3) If the HTTP port is set to 0, HTTP service will be disabled.
b)
LAN
LAN
Field Name
Explanation
IP address
LAN static IP
Enable bridge
mode
If Bridge Mode is activated, the equipment will not provide an IP address for the LAN
port. Instead, the LAN and WAN will be part of the same network. If this is activated,
clicking Apply, will cause the equipment will reboot.
Note: If bridge mode is chosen, static LAN configuration will be disabled automatically.
