16
search caller, @1 is using SIP1, user also can configure @2(SIP2),the rest lines can be
deduced by analogy, if no use, is 500/p, it will pass the SIP1 line in default, /p means
presence function is using.
At this moment, press this button, it can show the corresponding phone’s status (on, off,
fail,) which LED don’t remind.
z
/f speed dial, user configure it as same time as above attribute, after configuring, phone
will implement above function in priority, then considering to perform speed dial
z
/i PUSH TO TALK, user presses this button in standby, the phone can call other phone
and the other phone will auto answer.
User can configure PUSH TO TALK according to the chart: 700 are number of callee.
After configuring, the phone can call 700 and make 700 auto answer by pressing this button.
3.2.7. Call pickup
Call pickup is implemented by simulating pickup function of PBX. it’s that, when A calls B, B
rings but no answer, at this moment, C can hook off and input an appointed prefix plus B’s
number, pick up A’s call and talk with A.
The following chart shows how to configure an appointed prefix in dial peer to have call pick
up function.
*1* means appointed prefix code. After making the above configuration, C can dial *1* plus
B’phone number to pick up A’s call. User can set prefix in random, in the case of no affecting
current dialing rules.
3.2.8. Join call
When B is calling C, A can join in the existing call by inputting an appointed prefix numbers
plus B or C number, if B or C also supports join call
The following chart shows how to configure an appointed prefix in dial peer to have join call
function.
*2* means appointed prefix code. After making the above configuration, A can dial *2* plus
B or C number to join B and C’s call, . User can set prefix in random, in the case of no
affecting current dialing rules.
3.2.9. redial/unredial
If B is in busy line when A calls B, A will get notice: busy, please hang up. If A want to
connect B as soon as B is in idle, he can use redial function at the moment and he can dials
an appointed prefix number plus B’s number to realize redial function.
What is redial function? A can’t not build a call with B when B is in busy ,then A will
subscribe B’s calling mode at 60 second intervals. once B is available, A will get reminder of
rings to hook off, while A hooks off, A will call B automatically. If at this time A is occupied
temporarily and unwilling to contact B, A also can cancel the redial function by dialing an
appointed prefix plus B’s number before making the redial function.
*3* is appointed prefix code. After making the above configuration, A can dial
*3* plus B’phone number to make the redial function.
*4* is appointed prefix code. After configuration, A can dial *4* to cancel redial function.
