background image

WWW.FANTOMRACING.COM

IMPORTANT INFORMATION

No Fantom dealers, distributors, or resellers of any kind, are authorized to repair and/or replace any Fantom products. ALL
warranty claims and/or repairs must be handled directly with Fantom.

Fantom will not reimburse any expenses incurred to return any Fantom product, whether for warranty claim or repair.

Fantom is NOT responsible for any lost or stolen items once they are in the possession of the shipping company. Fantom is
not responsible for items delivered to the wrong address. Fantom will not be responsible for replacing any lost, stolen, or
incorrect delivery of any item.

Before sending your ESC in for warranty review, please review the troubleshooting chart and make sure that you have tried
all the actions listed. Also, please double check that all the installation and setup procedures have been done correctly.
Upon review of your returned ESC, if we find that no problems exist with the ESC, a $10 diagnosis fee plus the return
shipping cost will be charged.

The receiver wire is required for diagnosis. If your ESC is returned with a clipped receiver wire, a $15 service fee will be
charged for the replacement, even if your ESC is otherwise covered under warranty.

This warranty is non-transferable.

Fantom’s liability shall never exceed the product’s original cost.

Because Fantom has no control over the use of this product the purchaser accepts all responsibility and cannot hold Fantom
responsible for any damages and/or injury incurred by improper use or improper judgment in using this product.

Fantom Racing reserves the right to change the provisions of this warranty at any time without prior notification. The 
information provided on our website is based on our experience and is only our opinion. Because there are so many variables, 
your experience may differ from ours. By no means is any information given as a guarantee to a product’s performance, and 
the purchaser assumes all risk and liabilities. 

If we are unable to service a defective product, that is no longer available, your product will be repaired or replaced with a 
product that equals or exceeds your original item, with all applicable charges applied.

Due to ongoing development, prices, products, availability, and specifications are subject to change without notification.

DISCLAIMER:

By using this product, you agree with and acknowledge that you have read and understand all the instructions and warnings 
contained in this document and that you agree to take full responsibility and assume all risks associated with the use and/or 
misuse of this product and related products.  You also agree that Fantom Racing owners, employees, affiliates, manufacturers, 
dealers, distributors, and resellers cannot be held responsible for any damage and/or injury caused from the use and/or 
misuse of this product.  If you disagree with anything written in this document, please return this product.  The product must 
be in brand new condition to be accepted for return.

CONTACT INFO: 

Email: [email protected]

Phone: 269.483.0200

www.fantomracing.com

Summary of Contents for FR-10 PRO ESC












Reviews: