15
Preset parameter reset
To resume the preset temperature pro
fi
les and
values (T1-T2-T3-Temperature used with the
Manual mode, Temperature used with the Jolly
mode, Antifreeze temperature, OFF function),
keep the
▲
and
▼
buttons depressed simulta-
neously when you are in the temperature pro-
fi
le programming mode.
Displaying the temperature detected by
the separate probe
To display the temperature detected by the
separate probe (only if the latter has been con-
fi
gured as an external probe or
fl
oor-mounted
probe), the programmable thermostat must be
con
fi
gured (refer to <<programmable thermo-
stat con
fi
guration>>) and the probe must be
connected.
To display the temperature value read by the
separate probe, press the button of the oper-
ating mode currently used (the temperature
will blink). To display again the temperature
detected by the programmable thermostat,
press again the button of the operating mode
currently used (the temperature will not blink
any longer).
Statistical data
The CH150 programmable thermostat provides
a set of statistical data concerning the system
operation. To access this data, proceed as fol-
lows:
1. Enter the programming menu main page. The
operating mode currently used will be interrupted
temporarily. Choose the statistical data function.
2. Page 1: number of
hours during which the
system was operated
on the previous day (6
hours in the image).
Use the
►
button to go
to the next page.
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
