switched to the phone.
2-2) Press and hold the left and right earbuds multifunction button for 2-5 seconds at the same time,
the earbuds are reconnected, and the talking is switched to the earbuds.
When dialing:
Click the multifunction button to cancel.
Redial
: Double-click the multifunction button to redial the last number in the call list.
8. Change Language
Turn off the two earbuds first, then press and hold the multi-function button of any one of the earbuds
for 3 seconds until the LED flashes blue, then double-click the multi-function button,the LED will flash
red and blue, then double-click the multi-function button to change the language;Use the same
method to change the language of another earbud.
(Note that when changing the language,only one earbud can be operated separately each time,and
the other must be turned off.)
9. Other Description
Wake up Siri:
Press the multifunction button 2 seconds to wake up Siri.
Low electricity prompt:
When the power of the earbud is less than 20%, the earbuds will sound
“
under-charge
”
every 60 seconds and flash red every 5 seconds. At this time the earbuds need to be
charged.
Friendly Reminder
1. Before use, first charging box charge for more than 1 hour, the blue light always on when fully charged
(Note: At this time the earbud will not be charged).
2. Unplug the USB charging cable, the earbud charge for about 1 hour, the blue light goes out when fully
charged, then you can use it.
3. Please take it lightly and use it away from high temperatures.
4. Near the signal tower, traffic lights and substations may result in signal cut in and cut off.
5. The effective range of this earbuds is about 15 meters, the actual wireless distance is affected by the
environmental factors of use.
6. For safety don
’
t increase the volume to the maximum on the street.
Q & A
Q1: No connection between IP8-X and your Bluetooth device.
A1: 1. Make sure IP8-X is fully charged and switched ON.
2. Check that your device is available and supports the A2DP Bluetooth Profile.
3. Move IP8-X closer to your device.
Q2: Device paired successfully, but still no sound.
A2: 1. Increase the volume off your device to its maximum level.
2. Disconnect and reconnect your device with IP8-X.
Note: to avoid damage to your ears, do not wear the Earbuds during this process.
