Fantek T-102, Operating Instructions Manual

Page: 17 / 32

TABLA 1
REF DESCRIPCIÓN MATERIAL ACABADO
T-102/001 Tramo base Acero Zincado / Negro
T-102/002 Tramo 1 Acero Zincado / Negro
T-102/003 Tramo 2 Acero Zincado / Negro
T-102/004 Tornillo Contera Acero Zincado / Negro
T-102/005 Cable acero 4mm Acero Galvanizado
T-102/006 Cabrestante Acero Zincado
T-102/007 Gatillo retén patas Acero Zincado
T-102/008 Nivel burbuja Plástico Zincado
T-102/009 Pata Acero Negro
T-102/010 Roldana de acero Acero Zincado
T-102/011 Tornillo M-10 + Tuerca M-10 Acero Zincado
T-102/012 Tapón plástico pata Plástico Negro
T-102/013 Eje de acero Acero Zincado
T-102/013.1 Tornillo M5x12 Acero Zincado
T-102/014 Roldana de acero Acero Zincado
T-102/015 Pletina acero Acero Zincado
T-102/015.1 Tornillo M4x10 Acero Zincado
ACC/4 Portapolea 40
ACC/4-001 Pletina acero Acero Zincado / Negro
ACC/4-002 Roldana acero Acero Zincado
ACC/4-003 Perno roscado M10 + Tuerca M10 Acero Zincado
ACC/4-004 Tornillo M6 + Arandela Acero Zincado
ACC/4-005 Pletina acero interior Acero Zincado
ACC/6 Contera pequeña Acero Zincado / Negro
ACC/10 Dispositivo Toma Tierra Acero Zincado
ACC/11 Estabilizador completo M14 Acero Zincado
ACC/11-001 Maneta estabilizadora Acero Zincado
ACC/11-002 Perno roscado M14 Acero Zincado
ACC/11-003 Plato estabilizador Acero-Caucho Zincado
ACC/13 Mosquetón hexagonal Acero Zincado
1.- Introduction
Dear customer. We have written this manual with the objective to optimize the use of
our lifting tower T 102. We ask you to read these directions attentively before using the
tower.
All our products have been submitted to the most exigent tests and controls during the
process of fabrication.
For the certifications contained in the present manual to take effect, only original spare
parts must be used in all repair works.
The reference number and the year of construction or the serial number must be
indicated for any consultation on the product.
2. Technical specifications
Lifting telescopic tower model T-102. This tower is designed to lift loads such as supports
for structures and illumination gadgetry in a vertical sense to different heights.
2.1.- Max. load: 100 kg
2.2.- Min. load: 25 kg
2.3.- Max. height: 5 m
2.4.- Min. height: 1,9 m
2.5.- Base area: 2 x 2 m
2.6.- Folded base area: 0,37 x 0,37 m
2.7.- Weight: 32 kg
2.8.- Winch: 350 kg. Maximum load with automatic stop load brake. Certified in
Düsseldorf according to DIN 15020 and VBG 8 with the number GS03015.
2.9.- Cable: Steel DIN 3060. Tensile strength 180 kg/mm
2
. Twisting-resistant. 4 mm cable
diametre.
2.10.- Three-profile telescopic system operated by steel cable driven by grooved pulleys
with SELOIL bronze pads.
2.11.- Construction material: Steel profiles EN 10305.
2.12.- Profile fixing at working height by safety steel fastener ACC/13.
2.13.- Adjustable stabilizer plates in the legs with nonslip rubber supports.
2.14.- Leg anchorage by safety triggers (R).
2.15.- Antirust protection and electroplated zinc or black finish.
2.16.- Bubble level for vertical alignment of the tower.
2.17- Ground connection device, ACC/10.