1.- Introduction
Dear customer. We have written this manual with the objective to optimize the use of
our lifting tower T 101. We ask you to read these directions attentively before using the
tower.
All our products have been submitted to the most exigent tests and controls during the
process of fabrication.
For the certifications contained in the present manual to take effect, only original spare
parts must be used in all repair works.
The reference number and the year of construction or the serial number must be
indicated for any consultation on the product.
2.- Technical specifications
Lifting telescopic tower model T-101. This tower is designed to lift loads such as supports
for structures and illumination gadgetry in a vertical sense to different heights.
2.1.- Max. load: 100 kg
2.2.- Min. load: 25 kg
2.3.- Max. height: 3,2 m (with extensible supplement T-101/008): 3,8 m
2.4.- Min. height: 1,26 m
2.5.- Base area: 1,53 x 1,53 m
2.6.- Folded base area: 0,30 x 0,30 m
2.7.- Weight: 21 kg
2.8.- Winch: 350 kg. Maximum load with automatic stop load brake. Certified in
Düsseldorf according to DIN 15020 and VBG 8 with the number GS03015.
2.9.- Cable: Steel DIN 3060. Tensile strength 180 kg/mm
2
. Twisting-resistant. 4 mm cable
diametre.
2.10.- Construction material: Steel profiles EN 10305.
2.11.- Three-profile telescopic system operated by steel cable driven by grooved pulleys
with SELOIL bronze pads.
2.12.- Profile fixing at working height by safety steel fastener ACC/13.
2.13.- Legs with nonslip rubber supports.
2.14.- Leg anchorage by safety triggers (R).
2.15.- Antirust protection and electroplated zinc or black finish.
2.16.- Ground connection device, ACC/10.
