13
Mounting
CHAIN - OPTION
1
Place your fastening hooks on the strapping board, the
floor joists or underneath the concrete floor.
2
Attach a hanging chain to each screw paired with a
washer (provided) in the top 4 corners of the unit and
tighten.
3
Install a spring on each chain. Hook the spring in the
links so a loop is created in the chain. The spring will
then support the unit's weight and absorb vibrations.
4
Hang the unit by slipping a link onto the hanging hooks,
making sure the unit is level.
6
Secure both side of the unit using the same method as step 1.
Summary of Contents for FIT 120E
Page 18: ...18 Wiring diagram Observe polarity on all accessory controls where applicable ...
Page 46: ...46 Note ...
Page 47: ...47 Note ...
