background image

United States

1712 Northgate Blvd.

Sarasota, FL.  34234

Phone: 800.747.1762; 941.309.6000

Fax: 800.487.9915; 941.309.6099

www.fantech.net; [email protected]

Canada

50 Kanalflakt Way

Bouctouche, NB E4S 3M5

Phone: 800.565.3548; 506.743.9500

Fax: 877.747.8116; 506.743.9600

www.fantech.ca; [email protected]

Article #: 301111

Item #: 401999 

Rev Date: 122304

Contactor for 3-Phase Fans, 208-230/460v

460 Volt Three Phase Fans

Important note: 

For 460 volt operation, Orange (W2), Red (U2)
and Grey (V2) wires must be spliced together.

Notes:

1.Contactor should

be used. Control
coil should be
wired in series
with motor ther-
mal contacts (TK
leads) as shown 
in diagram to 
provide thermal motor protection.

2.All leads are color coded as well as identified with a band 

containing an Alpha/Alpha or Alpha/Numeric code (i.e. TK or
Z2). Colors should be verified against code band. If code band
and color do not correspond to schematics above, wire accord-
ing to the code on the band.

115 Volt Single Phase Fans

Wiring schematic for 4 lead motors, single phase

Notes:

1.All leads are color

coded as well as
identified with an
Alpha / Alpha or
Alpha / Numeric
code (i.e. TK or
Z2). This code may
be shown as a
band on the wire or on a schematic on the motor hub. Colors
should be verified against code band. If code band and color do
not correspond to schematics above, wire according to the
code on the band.

2.Color of capacitor leads may be reversed. Fan operation will not

be affected.

230 Volt Three Phase Fans

Notes:

1.Contactor should

be used. Control
coil should be
wired in series
with motor ther-
mal contacts (TK
leads) as shown
in diagram to
provide thermal
motor protection.

2.All leads are color coded as well as identified with a band con-

taining an Alpha/Alpha or Alpha/Numeric code (i.e. TK or Z2).
Colors should be verified against code band. If code band and
color do not correspond to schematics above, wire according to
the code on the band.

Motor

Leads

Black

(Ground)

L (Black)

N (White)

Supply

Voltage

Blue

Green/Yellow

Motor

Leads

Brown

Black

Capacitor

(Ground)

L (Black)

N (White)

Supply

Voltage

Blue

Green/Yellow

Models: FADE 18-4, 20-4, 22-6, 25-6

Models: FADE 20-4, 22-6, 25-6  (Dual voltage)

Models: FADE 8-4

115 Volt Single Phase Fans

Models: FADE 10-4, 12-4, 14-4, 16-4

120 Volt Single Phase Fans

Motor
Leads

Black-Z1

Blue-U2

Capacitor

(Ground)

L (Black)

N (White)

Supply

Voltage

Brown-TK

Green/Yellow (     )

Motor
Leads

Orange-W2

Red-U2

Grey-V2

(Ground)

Line 1

Line 2

Supply

Voltage

Brown-U1

Blue-V1

Black-W1

White-TK

White-TK

Green/Yellow (     )

Line 3

Motor
Leads

(Ground)

Line 1

Line 2

Supply

Voltage

Brown-U1

Blue-V1

Black-W1

White-TK

White-TK

Green/Yellow (     )

Line 3

W2

U2

V2

Orange-

Grey-

Red-

L1

Incoming

3-Phase Supply 208/230/460

Control Power

for Contactor

AC Contactor

L2

L3

TK

TK

L1

L2

L3

L3

Ground

T1

T2

T3

C1

C2

Motor Leads

Models: FADE 20-4, 22-6, 25-6

  (Dual voltage)

WIRING DIAGRAM FOR FADE SERIES

Summary of Contents for FADE Series














Reviews: