READ THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLING THE FAN AND SAVE THE INSTRUCTIONS FOR FUTURE REFERENCE.
IT IS RECOMMENDED THAT THESE FANS BE INSTALLED BY LICENSED PROFESSIONAL TRADESPERSONS.
Upon receiving the unit, check for any damage and report it immediately to the shipper. Also insure all accessory items are accounted for.
Move fan to desired location and determine the method by which the fan is to be mounted as shown in the illustrations below. Optional Wall Housings
and Wall Mounting Collars provide a convenient means of mounting sidewall fans while maintaining the proper distance between the propeller and
damper.
Attach the fan by inserting a suitable fastener through each of the pre-punched mounting holes in the fan panel. Care should be taken not to bend or
distort the fan panel or damage drive components during installation. belt-drive fans mounted direct to walls will require suitable attachment holes
drilled around the perimeter of the fan panel.
The motor voltage and amperage must be checked for compatibility with the electrical supply.
Supply wiring to the unit must be properly fused and conform to local and national electrical codes.
TYPICAL INSTALLATIONS
Wall opening size and propeller-to-damper distance are two important dimensions for fan installation. Fans mounted to the wall require a different
opening (W.O.) than those mounted in wall housings or wall collars. Propeller-to-damper distance is important to reduce turbulence and damper flutter
which may lead to premature damper failure.
Illustrations #1 and #2 show the wall opening (W.O.1) required for installations with either wall housing or a wall collar. Illustration #3 shows the rec-
ommended wall opening (W.O.2) and the minimum (M) distance suggested between the fan and damper for direct to wall installations.
Additional
support or bracing (by others) may be required to support mounted fans.
WALL OPENING REQUIREMENTS
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
FOR FADE, TABE & THDAB
#1
Wall Housing Installation
#2
Wall Collar Installation
#3
Direct to Wall Installation
W.O.1
W.O.1
W.O.2
READ & SAVE THESE INSTRUCTIONS!
Fan Model
W.O.1
Damper
W.O.2
Damper
M i n i m u m
FADE
TABE
THDAB
Sq
Sq
Sq
Sq
Distance
8
N/A
N/A
9 1/2
9
6
10
N/A
N/A
11
10
7
12
21 1/2
18
13 1/2
12
7
14
21 1/2
18
16 1/2
16
8
16
24 1/2
21
18 1/2
18
9
18
24 1/2
21
21 1/2
21
9
20
26 1/2
21
21 1/2
21
10
22
32 1/2
26
26 1/2
26
11
25
32 1/2
26
26 1/2
26
12
20
25 1/2
20
22
20
10
24
24
31 1/2
26
28
26
11
30
30
37 1/2
32
34
32
14
36
36
43 1/2
38
40
38
14
42
42
49 1/2
44
46
44
15
48
48
55 1/2
50
52
50
16
54
54
61 1/2
56
58
56
19
60
60
67 1/2
62
64
62
20
72
81 1/2
76
78
76
26
M
Summary of Contents for FADE Series
Page 1: ......
