background image

Five (5) Year Warranty

DURING ENTIRE WARRANTY PERIOD:

FANTECH will repair or replace any part which has a factory defect in workman-
ship or material. Product may need to be returned to the Fantech factory,
together with a copy of the bill of sale and identified with RMA number.

FOR FACTORY RETURN YOU MUST:

• Have a Return Materials Authorization (RMA) number. This may be obtained

by calling FANTECH either in the USA at 1.800.747.1762 or in CANADA at
1.800.565.3548. Please have bill of sale available.

• The RMA number must be clearly written on the outside of the carton, or

the carton will be refused.

• All parts and/or product will be repaired/replaced and shipped back to buyer;

no credit will be issued.

OR

The Distributor may place an order for the warranty part and/or product and is
invoiced. The Distributor will receive a credit equal to the invoice only after
product is returned prepaid and verified to be defective.

FANTECH WARRANTY TERMS DO NOT PROVIDE FOR REPLACEMENT WITH-
OUT CHARGE PRIOR TO INSPECTION FOR A DEFECT. 
REPLACEMENTS ISSUED IN ADVANCE OF DEFECT INSPECTION ARE
INVOICED, AND CREDIT IS PENDING INSPECTION OF RETURNED 
MATERIAL. DEFECTIVE MATERIAL RETURNED BY END USERS SHOULD NOT
BE REPLACED BY THE DISTRIBUTOR WITHOUT CHARGE TO THE END USER,
AS CREDIT TO DISTRIBUTOR’S ACCOUNT WILL BE PENDING INSPECTION AND
VERIFICATION OF ACTUAL DEFECT BY FANTECH.

THE FOLLOWING WARRANTIES DO NOT APPLY:

• Damages from shipping, either concealed or visible. Claim must be filed with

freight company.

• Damages resulting from improper wiring or installation.
• Damages or failure caused by acts of Gad, or resulting from improper con-

sumer procedures, such as:

1. Improper maintenance
2. Misuse, abuse, abnormal use, or accident, and
3. Incorrect electrical voltage or current.

• Removal or any alteration made on the FANTECH label control number or

date of manufacture.

• Any other warranty, expressed, implied or written, and to any consequential

or incidental damages, loss or property, revenues, or profit, or costs of
removal, installation or reinstallation, for any breach of warranty.

WARRANTY VALIDATION

• The user must keep a copy of the bill of sale to verify purchase date.
• These warranties give you specific legal rights, and are subject to an applica-

ble consumer protection legislation. You may have additional rights which
vary from state to state.

Fantech, reserves the right to modify, at any time and without notice, any
or all of its products’ features, designs, components and specifications to
maintain their technological leadership position. 

Item #: 401441

Rev Date: 120606

United States

1712 Northgate Blvd., 

Sarasota, FL.  34234

Phone: 800.747.1762; 941.309.6000

Fax: 800.487.9915; 941.309.6099

www.fantech.net; [email protected]

Canada

50 Kanalflakt Way, 

Bouctouche, NB E4S 3M5

Phone: 800.565.3548; 506.743.9500

Fax: 877.747.8116; 506.743.9600

www.fantech.ca; [email protected]

Summary of Contents for DBF110













Reviews: