Quick Installation Guide
STEP
Please use the provided handles to secure
the 4 HDDs with screws.
Press the circular deepening to open the cover.
Slide 4 HDDs into the chassis and make sure they are securely
installed in order from up to down
.
Adjust the metal frame that was removed back to the chassis and
close the cover (based on how it was opened in Step 2).
Connect the FANTEC QB-35US3 to the power adapter, plug in
USB or eSATA cable in the rear panel and power on the device.
If the HDD is unformatted, you have to initialize it at your PC.
Please run the steps as followed: At first click “Start”, “Execute” at your
Windows based PC and key in “diskmgmt.msc”. After that please
press the “RETURN” key.
Take the transport paper board out of the device.
Press down the rib to detach the metal frame and remove it.
NOTE: Make sure the HDD1 is securely installed in slot 1. Otherwise the
PC may not recognize the device. The content of slot 2 - 4 may very.
