background image

Macintosh 10.X O.S

STEP

In “Disk Utility” function to “Erase” or “Partition” disk.

Diskmgmt.msc

Windows Vista/7 (32/64bit)

STEP

Initialize Disk if it is a new one.

Format finished

t finished

Create a new partition and format the hard drive: Next

ʈ

finish

Windows 2000 / XP

STEP

Format finished

Diskmgmt.msc

Summary of Contents for US330

Page 1: ...vel 3 Button 17 and 18 need to be pressed for 3 seconds to switch the device s mode This design will prevent accidental execution of these functions Power Prees 3 seconds to power off the device Blue power on Orange standby HDD1 HDD2 HDD3 HDD4 active Interface switch Synchronization mode switch FRONT COVER METAL FRAME Diagram Power Press to open FORCED CONVECTION PROCESS INTERFACE SYNC FAN SMART F...

Page 2: ...the FANTEC QB 35US3 to the power adapter plug in USB or eSATA cable in the rear panel and power on the device If the HDD is unformatted you have to initialize it at your PC Please run the steps as followed At first click Start Execute at your Windows based PC and key in diskmgmt msc After that please press the RETURN key Take the transport paper board out of the device Press down the rib to detach...

Page 3: ...ion to Erase or Partition disk Diskmgmt msc Windows Vista 7 32 64bit STEP Initialize Disk if it is a new one Format finished t finished Create a new partition and format the hard drive Nextʈfinish Windows 2000 XP STEP Format finished Diskmgmt msc ...

Page 4: ...ration Environment Note STEP USB port of your PC must support power off function so that the device would go to sleeping mode Setting up motherboard s power management in S3 is strongly recommended For more details please refer to user guide of motherboard BIOS setting Simply press the POWER button to power the device on and press the button for 3 seconds to power off the device Operation System W...

Reviews: