Fanimation Windpointe MW75 Series Manual Download Page 2

Important Safety Instructions

WARNING: To avoid fire, shock and serious personal injury, follow these instructions.

1.   Read your owner’s manual and safety information before installing your new fan.  Review the accompanying assembly diagrams.
2.   Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power 
from being switched on accidentally.  When the service disconnecting means cannot be locked, securely fasten a warning device, such
as a tag, to the service panel.
3.   Be careful of the fan and blades when cleaning, painting, or working near the fan.  Always turn off the power to the ceiling fan before 
servicing.
4.   Do not insert anything into the fan blades while the fan is operating.
5.   Do not operate reversing switch until fan blades have come to a complete stop.

Additional Safety Instructions

1.   To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not operate fan without blades.
2.   All wiring and installation procedures must comply with AS/NZS 3000 Wiring Rules and any local regulations.  The ceiling fan
must be grounded as a precaution against possible electrical shock.  Electrical installation 

must be made by a licensed electrician

.

3.   The fan base must be securely mounted and capable of reliably supporting at least 27kg. See page 4 of owner’s manual for support
requirements.

4.   The fan must be mounted with the fan blades at least 2.1 meter from the floor to prevent accidental contact with the fan blades.
5.   Follow the recommended instructions for the proper method of wiring this ceiling fan.
6.

This fan is not suitable for use with solid state controllers

.

WARNING:

  This product is designed to use only those parts supplied with this product and/or accessories designated specifically for 

use with this product.  Using parts and/or accessories not designated for use with this product will void your warranty and could result in 
personal injury or property damage. 

WARNING:

  To reduce the risk of personal injury, do not bend the blade bracket (flange or blade holder) when installing the brackets, 

balancing the blades, or cleaning the fan.  Do not insert foreign objects in between rotating fan blades.

WARNING:  

This fan MUST  be installed with an easily accessible isolating

 device to disconnect all poles of the fan from the main supply.  

The contact distance in all poles must be 3mm minimum.

6.   Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
7.   Contact your local government for information regarding the collection systems available.

8.   If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the 
food chain, damaging your health and well-being. 
9.   That the replacement of parts of the safety suspension system device shall be performed by the manufacturer, its service agent or 
suitably qualified persons.

10.  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabiliti

11.  The fixing means for attachment to the ceiling such as hooks or other devices shall be fixed with a sufficient strength to withstand 
4 times the weight of the ceiling fan; that the mounting of the suspension system shall be performed by the manufacturer, its service agent 
or suitably qualified persons.
12.  The instructions state that: means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
13.  If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to 
avoid a hazard.

es, or lack

of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. 

14.  Children should be supervised to ensure that they do not play with the appliance. 

Table of Contents

Unpacking Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Energy Ef

 cient Use of Ceiling Fans  . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Electrical and Structural Requirements . . . . . . . . . . . . . . . . . . . . . . . . . .4
How to Assemble Your Ceiling Fan  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
How to Hang Your Ceiling Fan  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
How to Wire Your Ceiling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing the Canopy Housing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

8

..  

g

n

i

s

u

o

H

 

h

c

ti

w

S

 

d

n

s

e

d

a

l

B

 

n

a

F

 

e

h

g

n

it

n

u

o

M

 

d

n

a

 

g

n

il

b

m

e

s

s

A
Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Blade Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Exploded-View Drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trouble Shooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

13

WARNING:

  If unusual oscillating movement is observed, immediately stop using the ceiling fan and contact the manufacturer, its service 

agent or suitably qualified persons.

Summary of Contents for Windpointe MW75 Series















Reviews: