8
Installing the Canopy Housing
1.
Screw in two threaded rods into the Hanger Bracket
(Figure 1a).
NOTE:
The threaded rods in the hanger bracket serve as
guides for easier installation.
2.
Securely attach the Canopy Housing to the Hanger
Bracket using the external lockwashers and knurled knobs
supplied with your fan (Figure 1b).
Figure 1a
Figure 1b
NOTE:
Supply wires and fan wires omitted for clarity.
NOTE:
This step is applicable
after
the neccessary wiring
is completed. (see page 7)
Figure 1
Installing the Lower Housing Assembly
1.
Place flat washer along the motor shaft (Figure 1).
Figure 2
2.
Securely attach the Adapter Plate to the motor shaft by
tightening the setscrew with the allen wrench supplied with
your fan. (Figure 2)
▲
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy housing
and not pinched between the housing and the ceiling.
