This Manual is Designed to Make it as Easy as Possible for You
to Assemble, Install, Operate, and Maintain Your Ceiling Fan
Unpacking Instructions
For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all
steps have been completed and will be helpful in
fi
nding your place should you be interrupted.
Wiring outlet box and box connectors must be of type
required by local code. The minimum wire would be a 3-
conductor (2-wire with ground) of the following size:
NOTE:
Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are missing,
contact your local retailer.
Tools Needed for Assembly
Materials
Wire Size A.W.G.
Installed Wire Length
14
12
Up to 50 ft.
50 - 100 ft.
NOTE:
If you are uncertain of part description, refer to
exploded view illustration. (Figure 1, page 13)
3
1.
Check to see that you have received the following
parts:
• Fan Motor/Housing
assembly
• Downrod/Hanger Ball
assembly
• Blade Arms (5)
• Wood Blades (5)
• Ceiling Canopy
• Upper Housing Cover
• Hanger Bracket
• Adapter Plate
• Downlight Socket Plate
Assembly
• Lower Glass
• C20 Remote Control
• Canopy Receiver Unit
Blade Arms
Downlight
Socket Plate
Assembly
Lower Glass
Hardware Bags
Fan Motor/Housing Assembly
Downrod/
Hanger Ball
Assembly
Hanger
Bracket
• One Phillips head screwdriver
• One stepladder
• One ¼
˝
blade screwdriver
• One wire stripper
•
Three wire connectors
(supplied)
Ceiling Canopy
Adapter Plate
Wood Blades
C20 Remote
Control
• Hardware bag:
– Eleven ¼-20 x ½
˝
(blade arm
to fan motor hub) screws with
lockwashers
– Sixteen 10-32 (blade
to blade arm) locking hex-
nuts with flat washers
– Two 5/32
˝
threaded rods
– Two 5/32
˝
lockwashers
– Two knurled knobs
– Four screws, 5/32-32 x ¼
˝
with
spring washer
(D/L plate to adapter plate)
– Four screws, 5/32-32 x
3
/
8
˝
with
spring washer
(upper housing to coupler)
– Four wire nuts
– Flat washer
– Allen wrench
– Phillips screwdriver, 4
˝
– Support Cable bag
– Balance Kit
▲
WARNING
Do not install or use fan if any part is damaged or
missing. This product is designed to use only those
parts supplied with this product and/or any accessories
designated specifically for use with this product by
Fanimation. Substitution of parts or accessories not
designated for use with this product by Fanimation could
result in personal injury or property damage. Contact
your retail store for missing or damaged parts.
▲
WARNING
Before assembling your ceiling fan, refer to section on
proper method of wiring your fan (page 4). If you feel you
do not have enough wiring knowledge or experience,
have your fan installed by a licensed electrician.
Upper Housing
Cover
Canopy
Receiver
Unit
