11
How to Operate Your Ceiling Fan
MAIN FUSE BOX
Figure 1
1.
Restore electrical power to the outlet box by turning
the electricity on at the main fuse box (Figure 1).
9V BATTERY
REMOTE
CONTROL
Figure 2
2.
To make fan operational, install 9-volt battery in
hand-held remote transmitter, (if not using for long
periods of time, remove battery to prevent damage
to transmitter). Store the remote away from
excessive heat or humidly (Figure 2).
5-BUTTON
REMOTE
CONTROL
Figure 3
3.
The 5-button hand-held remote transmitter includes
five buttons for high, medium and low fan speeds
as well as fan off and light on/off. Infinite light levels
are available by holding the light on/off button
(Figure 3).
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until the blades are in place. Noise and
fan damage could result.
WARNING
REVERSE
SWITCH
Figure 4
4.
If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Then slide the reverse switch on top of motor
assembly to the opposite position and turn fan on
again (Figure 4).
Reverse Switch Information
Season
Rotation Direction Switch Position
Summer
Counter-Clockwise
Left
Winter
Clockwise
Right
