9
1/4˝-20
Pan Head Screws
with Lock Washer
(2 each per blade)
How to Assemble Your Ceiling Fan Blades
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled may
result in damage to the fan blades.
CAUTION
WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
1.
Secure the three blades using the 1/4˝-20 pan head
screws with lock washer and blade plates from the
hardware bag. Then through the holes located on the
bottom of the motor assembly. (Figure 1)
NOTE:
Periodically check blade hardware and
resecure if necessary.
Motor Assembly
Blade
Blade Plate
HARDWARE USED:
x 6
x 3
1/4
”
-20
Pan Head Screws
with Lock Washer
Blade Plates
How to Assemble Your Ceiling Fan (Continued)
Figure 9
9.
Remove one of the two shoulder screws in the
hanger bracket and retain the screw for later. Loosen
the second shoulder screw without fully removing it.
(Figure 9)
Hanger Bracket
Figure 1
