Fanimation HUGH 44, Manual

Page: 14 / 38

14
Trouble Shooting
WARNING
For your own safety turn off power at fuse box or circuit breaker before trouble shooting your fan.
Trouble Probable Cause Suggested Remedy
1. FAN WILL NOT START
1. Fuse or circuit breaker blown.
2. Loose power line connections to the fan, or loose
switch wire connections in the switch housing.
1. Check main and branch circuit fuses or circuit
breakers.
2. Check line wire connections to fan and switch wire
connections in the switch housings.
CAUTION: Make sure main power is turned off !
2. FAN SOUNDS NOISY
1. Blades not attached to fan.
2. Loose screws in motor housing.
3. Wire connectors inside housing rattling.
4. Motor noise caused by solid state variable speed
control.
1. Attach blades to fan before operating.
2. Check to make sure all screws in motor housing are
snug (not over-tight).
3. Check to make sure wire connectors in motor
housing are not rattling against each other or against
the interior wall of the housing.
CAUTION: Make sure main power is turned off !
4. Some fan motors are sensitive to signals from
solid-state variable speed controls. Solid-state controls
are not recommended, choose an alternative control
method.
3
.FAN WOBBLES
EXCESSIVELY
1. Check to be sure screws which attach the fan blade
to the flywheel are tight.
2. Tighten the ceiling bracket screws to the outlet box,
and secure outlet box.
1. Screws securing fan blade to motor hub are loose.
2. Ceiling bracket and/or ceiling outlet box is not
securely fastened.
3. Reversing switch in neutral position. 3. Make sure reversing switch position is all the way
to one side.
4. Dead battery in remote control. 4. Replace with new battery.