7
How to Assemble Your Ceiling Fan Blades
2.
Remove the two set screws and locking nuts in the
downrod support of the motor assembly and retain
for reinstallation in Step 4 of the How to Assemble
Your Ceiling Fan section, Page 8. Remove the six
screws at the top of the motor assembly and retain
them for next step. (Figure 2)
To reduce the risk of personal injury, do not bend the
NOTE:
Periodically check blade hardware and
resecure if necessary.
1.
Slide blades through slots in motor housing and attach
to the motor hub using the #8-32 serrated head screws
and flat washers. Make sure the screws securing the
blades to the motor hub are tight and are properly
seated. (
Figure 1)
blade when installing, balancing the blades or
cleaning the fan. Do not insert foreign objects in
between the rotating blades.
WARNING
!
HARDWARE USED:
x 9
x 9
FLAT WASHERS
SERREATED HEAD
SCREWS
#8-32
Motor Assembly
3.
Assemble the upper housing to the motor assembly
using the previously removed screws. (Figure 3)
Figure 2
Figure 1
Set Screws and
Locking Nuts (2)
Upper Housing
Motor
Assembly
Figure 3
#8-32 Serrated Head
Screw with Flat Washer
(3 per assembly)
Motor Assembly
Blade
