How to Assemble Your Floor Fan (Continued)
Rotating Switch
3.
You have now completed the assemby of your fan.
Plug cord directly into the socket. (Figure 3)
4.
Select the desired airflow, located on back of motor
assembly by rotating switch clockwise. (Figure 4)
Figure 3
Figure 4
Periodic cleaning of your fan is the only maintenance that
is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive and/or non-abrasive cleaning agents are not
required and should be avoided to prevent damage to
finish.
CAUTION
Do not use water when cleaning your fan. It could
damage the motor or the finish and create the
possibility of electrical shock.
Maintenance
Safety Instruction About Fuse
1.
This product employs overload protection (fuse). A
blown fuse indicates an overload or short-circuit situation.
If the fuse blows, unplug the product from the outlet.
Replace the fuse as per the user servicing instructions
(follow product marking for proper fuse rating) and check
the product. If the replacement fuse blows, a short-circuit
may be present and the product should be discarded or
returned to an authorized service facility for examination
and/or repair.
2.
Do not operate any fan with a damaged cord or
plug. Discard fan or return to an authorized service
facility for examination and/or repair.
3.
Do not run cord under carpeting. Do not cover cord
with throw rugs, runners, or similar coverings. Do not
route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped
over.
6
