10.
Attach the safety cable to ceiling support cable.
Slide cable clamp onto safety cable (from fan). Place
the end of cable through the loop of ceiling support
cable. Pull as much cable through loop as possible.
Feed end of cable into clamp hole and firmly tighten
screw (Figure 8). Cut off excess safety cable. You can
now proceed with the electrical wiring of your fan.
8.
Using the 3/8˝ x 2˝ lag bolt and flat washer, attach
safety cable to ceiling joist or wood structural member.
The lag bolt will pass through the flat washer, safety
cable loop, and into the building structure (Figure 6).
You will first drill a 1/4˝ pilot hole into the building
structure to prevent splitting or cracking.
NOTE:
Ceiling support cable cannot be secured to
outlet box only, it must be directly secured to ceiling
joist or structural member using the 3/8˝ x 2˝ lag bolt
and flat washer. (Figure 6)
For Close-to-Ceiling Fan
7.
Securely attach the hanger bracket to ceiling fan
outlet box using the outlet box screws and washers
supplied with the fan. (Figure 6)
9.
Hook the motor assembly onto the hanger bracket
assembly as shown (Figure 7).
1.
Connect the green grounding lead from the hanger
ball and the green grounding lead from the hanger
bracket to the supply grounding conductor (this may
be a bare wire or wire with green colored insulation).
Securely connect wires with wire connectors supplied.
(Figure 2)
2.
Securely connect the white fan motor wire to the
white supply (neutral) wire using wire connector
supplied. Securely connect the black fan motor wire
and blue wire to the black supply wire using wire
connector supplied. (Figure 2)
Outlet Box
Hook
Hanger Bracket
Motor
Assembly
WARNING
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring.
(Figure 1)
How to Wire Your Ceiling Fan
Main Fuse Box
Household
Supply
White
Blue
Listed Outlet Box
Black
Black
Green Wire
(Ground) from
Supply
Green Wire
(Ground) from
Hanger Bracket
Green Wire
(Ground) from
Hanger Ball
11
Figure 6
Figure 7
Figure 1
Figure 2
Wood Member (2" X 4" Approx.)
Ceiling Joist
Ceiling
Ceiling
Support
Hanger Bracket
Outlet
Box
NOTE:
SUPPLY WIRES
AND FAN WIRES OMITTED
FOR CLARITY
Attach Safety
Cable To Ceiling
Support Cable
Figure 8
How to Hang Your Ceiling Fan (Continued)
