18
How to Operate Your Ceiling Fan (Continued)
9.
To set the remote code in the same positions as
the receiver, use a small screwdriver or ball point pen
(neither included) to slide dip switches firmly up or
down. (Figure 7)
NOTE:
Factory setting is all up. Do not use this
position.
NOTE:
The remote unit has 32 different code
combinations. To prevent possible interference from
or to other remote units, simply change the
combination code in the remote and receiver.
Remote Control
Dip Switch
Figure 7
Figure 8
10.
Remote functions: (Figure 8)
• Indicator LED light: fan speed and light dimmer
indicator
• button: Tap once to turn off the fan. Press and
hold this button for 5 seconds to turn on or turn off
the buzzer.
• Sleep Timer: Fan must be turned on when set up
timer.
The fan and light will turn off after 1 hour.
The fan and light will turn off after 3 hours.
The fan and light will turn off after 6 hours.
• Light button: Turn ON\OFF the light.
Press to turn on the light and hold to dim or
brighten light to desired level, then release.
Press this button to switch color temperature
when the light is on.
• Fan Speed:
Turn on fan and turn speed up.
Turn on fan and turn speed down.
• Reverse button:
In order to reverse the direction of the fan, the fan
must be running.
Summer- The fan runs counterclockwise. Airflow
will provide a downward cooling breeze.
Winter- The fan runs clockwise. Airflow will force
warm air downward without a noticeable breeze.
• Home Away: Tap this button, the light will blink
twice signaling this feature is on; the fan will turn off
and the light will randomly turn on and off while you
are away. Pressing any button will cancel the
feature.
• Fresh Air: Fan speed will modulate to simulate
a natural breeze.
• Safe Exit: Tap once, the light will blink once; fan
and light will turn off after 1 minute. Pressing any
button will cancel this feature.