13
Figure 2
2.
Assemble the blade plate to the bottom of the
motor assembly using the 5/32˝-32 serrated head
screw. (Figure 2)
Blade Plate
x 7
5/32
˝
-32
Serrated Head Screw
HARDWARE USED:
5/32˝-32 Serrated
Head Screw
How to Assemble Your Ceiling Fan Blades (Continued)
Motor Assembly
How to Assemble Your Light Kit or Cap
1.
Remove one of the three screws in the support
bracket at the bottom of the motor assembly. Retain
the screw for later and slightly loosen the remaining
two screws. (Figure 1)
2.
Assemble the light plate assembly to the support
bracket using the two key slots in the light plate
assembly. Replace the previously removed screw
and securely tighten all three screws. (Figure 2)
Light Plate
Assembly
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
your light kit.
Figure 2
Figure 1