14
3.
Remove the three screws in the light plate
assembly and retain the screws for later. (Figure 3)
Light Plate
Assembly
Figure 3
4.
Connect the 2 single pin connectors from the LED
assembly to the 2 single pin connectors from the
motor assembly. (Figure 4)
Figure 4
Motor
Assembly
LED Assembly
Option A -- for use with light kit
NOTE:
If installing the steel cap, please skip to Step 7.
How to Assemble Your Light Kit or Cap (Continued)
5.
Assemble the LED assembly to the light plate
assembly. Replace the removed screws from Step 3
and secure all three screws. (Figure 5)
Light Plate
Assembly
LED Assembly
Figure 5
CAUTION
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
6.
Secure the light housing assembly with glass to
the light plate assembly by twisting in a clockwise
direction. Twist the light housing assembly with glass
gradually
until it snaps onto the light plate
assembly
. Do not over-tighten. (Figure 6)
Light Plate
Assembly
Light Housing
Assembly
with Glass
Figure 6