11
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors. Do not operate fan until the blades are in
place. Noise and motor damage could result.
3.
Connect wires using connectors as shown in
Figure 4.
Wire Connectors
RECEIVER HARDWARE USED:
X
8
How to Wire Your Ceiling Fan (Continued)
CAUTION:
INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
4.
After connections have been made and put the white and green leads to one side and the black leads
towards the other side, the connection should be turned upward and carefully push leads into the outlet box.
The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one
side of the outlet box and the ungrounded conductor on the other side. (Figure 5)
WARNING
The blades must be installed first before programming
is performed.
Figure 4
BLUE
BLACK / WHITE
(or WHITE)
BLUE
BLACK / WHITE (or BROWN)
BLACK / WHITE
(or BROWN)
BLACK
WHITE
L
N
AC
POWER
LIGHT KIT
YELLOW
/ GREEN
GROUND
HANGER
BRACKET
HANGER
BALL
DC MOTOR
BLACK
ANTENNA
RECEIVER
BLACK
WHITE
BLUE
RED
GRAY
YELLOW
RED
GRAY
YELLOW
Listed
Outlet Box
White Wire
from Supply
Green Wire
from Supply
(Ground)
Household
Supply
Black Wire
from Supply
Black Wire
from Receiver
White Wire
from Receiver
Green Wire
from Hanger
Ball (Ground)
Green Wire
from Receiver (2)
(Ground)
Receiver
Figure 5
Green Wire
from Hanger
Bracket (Ground)
Listed
Outlet Box
RED
BLACK
WHITE
BLK-ANT
GRAY
YELLOW
GREEN-Ground Wire
From Hanger Bracket
GREEN-
Ground wire
From Ceiling
GREEN-Ground Wire
From Hanger Ball
GREEN / YELLOW
- Ground wire (2)
From Receiver
BLACK / WHITE
(or BROWN)
BLUE
