FangLing F2100B/T, Operation And Installation Manual

Page: 41 / 147

Chapter 4 Part Option
32
【
ENTER
】
, the system will back to the start point of the operation, if press
【
ESC
】
, the
system will do nothing but go back to the graphic interface.
F2 Angle F3 Array F4 Scale
F5
SelLinePierce
F6 EditFile F7 Revert
FLSK F2200T
Version
3.3.71.1
Speed:
00000
File:
SHAPE_43.TXT
Status:
Pause
Current Line/Hole:
00000/00000
X： +000053.2
Y： +000009.4
【X】 Xmirror
【Y】 Ymirror
1:（TEST PATTERN）
2：G92
CutSpeed 【X】 1000.00 Kerf 【N】 1.20
ManualSpeed 【Y】 3000.00 Angle 0.00
Manual 【F】 keepMov
StepDis 【G】 5.00 Flame Cu 【M】
F1
StartPoint
F8 OK
Enter: Return back
ESC: Don’t move back
Angle: 10.048
Fig 4.6 Return to the start point after adjusting
4.3.2 Steel Plate Adjust Angle Memory Function
About steel plate adjust angle memory
，
please refer to the section of 8.7.6.6.
4.3.3 Enter Angle
When the angle of the current work piece is known, you can enter the angle:
Please enter angle
min：-360 max：360
Angle：
0.00
Note：
>0 Rotate CCW on the base of current
<0 Rotate CW on the base of current
=0 Reset the current part to 0 degree
Enter angle
After manually enter the angle, press
【
ENTER
】
to make sure, the graphic will be
rotate with the corresponding angle. Positive angle means rotate in counterclockwise,
while negative means clockwise. Press
【
ESC
】
to exit angle adjusting.
Illustration: when enter angle 0, process graph will restore to the location of 0
°
, at