22
8. ASSEMBLY
To fix the blades, place the motor block so that it is stable. Often, the polystyrene foam used for motor pack-
aging can make excellent support on your worktop.
The motor / tube / canopy / bottom cover are pre-assembled.
Position each blade on the motor block (the blades snap into place) and use the screws provided to secure
them.
Caution, tighten the screws carefully to avoid damaging the blades, but be sure to tighten properly to prevent
excessive vibration during start-up.
Blades screws
9. HANG THE CEILING FAN
1/ HANG THE CEILING FAN IN THE HANGER BRACKET
Take your ceiling fan and put the hanger ball at the top of the tube into the hanger bracket.
Turn the tube until the hanger ball locks into the hanger bracket (concave groove of hanger ball into the lugs
of hanger bracket).
A = Concave groove of hanger ball
B = Lugs of hanger bracket
C = Hanger bracket
2/ INSTALL THE SECURITY CABLE
For more security, fix the security cable provided, ideally to an element
independent of the fixing (beam ...), or for example on an anchor stud
with hook if concrete ceiling.
Be careful to not damage the electrical wires and not pinch them be
-
tween hanger ball and hanger bracket.
Summary of Contents for FANDC52
Page 32: ...www fanelite com fanelitebrand...
