F&U PAH-1218 Instruction Manual Download Page 12

                                                                                                                                                                                                                                               
 

Page:12/20                                                                                                                                               

 

12 

   
                               

 

 
 

 

 

 

 

 

 

 

3

Clean the upper filter screen frame 

1

Unscrew one screw fixed by EVA filter net and back shell with screwdriver, and take out EVA filter net.                                                                                               

2

Put the EVA filter screen into warm water with neutral detergent (about 40

 / 104

) and dry it in the 

shade after rinsing clean. 

 

VIII. Unit Storage:

 

i. 

Unscrew the drainage cover, unplug the water plug, and discharge the water in the water pan into other 
water containers or directly tilt the body to discharge the water into other containers. 

ii. 

Turn on the machine, adjust it to low-wind ventilation mode, and maintain this state until the drainage pipe 
becomes dry, so as to keep the inside of the body in a dry state and prevent it from mildewing. 

iii. 

Turn off the machine, unplug the power plug, and wrap the power cord around the wrapping post; install 
the water plug and the drainage cover.   

iv. 

Remove the exhaust pipe and keep it properly. 

v. 

Cover the air conditioning with a plastic bag. Put the air conditioning in a dry place, keep it out of the reach 
of children, and take dust control measures. 

vi. 

Remove batteries of the remote control and keep them properly. 

Note:

 ensure that the body is placed in a dry place and keep all machine components properly.

 

 

1. Information on servicing

 

1) Checks to the area   
Prior to beginning work on systems containing flammable refrigerants, safety checks are necessary to 
ensure  that  the  risk  of  ignition  is  minimized.  For  repair  to  the  refrigerating  system,  the  following 
precautions shall be complied with prior to conducting work on the system.   
2) Work procedure   
Work shall be undertaken under a controlled procedure so as to minimize the risk of a flammable gas or 
vapour being present while the work is being performed.   
3) General work area   
All maintenance staff and others working in the local area shall be instructed on the nature of work being 
carried  out.  Work  in  confined  spaces  shall  be  avoided.  The  area  around  the  workspace  shall  be 
sectioned off. Ensure that the conditions within the area have been made safe by control of flammable 

Summary of Contents for PAH-1218





















Reviews: