Page:10/20
10
Figure4
2. Elongate the exhaust pipe and snap the flat end of the exhaust pipe joints into the hole of the
window sealing plate assembly (as shown in Fig.5 and Fig.6) .
Notes
：
Τhe flat end of the exhaust pipe joints must be snapped into place.
The pipe cannot be distorted nor has substantial turning (greater than 45 °). Keep the ventilation of
the exhaust pipe not blocked.
Figure 5 Figure 6
Important Notice:
The length of the exhaust hose shall be 280~1,500mm, and this length is based on the specifications of the
air conditioning. Do not use extension tubes or replace it with other different hoses, or this may cause a
malfunction. Exhaust host must be not blocked; otherwise it may cause overheating.
VI. Drainage Instructions
This machine has two drainage methods: manual drainage and continuous drainage.
1
．
Manual drainage:
1) When the machine stops after the water is full, turn off the machine power and unplug the power
plug.
Notes
：
Please move the machine carefully, so as not to spill the water in the water pan at the
