background image

English

   - 39 -

Note: Screen Off 

option is not available if the Mode is set 

to

 Game

.

When the TV is not in use, please switch off or 

disconnect the TV from the mains plug. This will also 

reduce energy consumption.

Features

• TV supports Ultra HD (Ultra High Definition - also 

known as 4K) which provides resolution of 3840 x 

2160 (4K:2K). It equals 4 times the resolution of Full 

HD TV by doubling the pixel count of the Full HD TV 

both horizontally and vertically. Ultra HD contents are 

supported from HDMI, USB inputs and over DVB-T2 

and DVB-S2 broadcasts. 

• 

Remote controlled colour TV

• 

Fully integrated digital terrestrial/cable/satellite TV 

(DVB-T2/C/S2)

• 

Fransat Installation Option

• 

HDMI inputs to connect other devices with HDMI 

sockets

• 

USB input

• 

OSD menu system

• 

Stereo sound system

• 

Teletext

• 

Headphone connection

• 

Automatic programming system

• 

Manual tuning

• 

Automatic power down after up to eight hours.

• 

Sleep timer

• 

Child lock

• 

Automatic sound mute when no transmission.

• 

NTSC playback

• 

AVL (Automatic Volume Limiting)

• 

PLL (Frequency Search)

• 

PC input

• 

Game Mode (Optional)

• 

Picture off function

• 

Programme recording

• 

Programme timeshifting

• 

Ethernet (LAN) for Internet connectivity and service

• 

802.11 a/b/g/n built in WIFI Support

• 

Audio Video Sharing

Accessories Included

• 

Remote Control

• 

Batteries: 2 x AAA

• 

Instruction Book

Standby Notifications

If the TV does not receive any input signal (e.g.  from 

an 

aerial or HDMI source) f

or 3 mi

nutes, it will go 

into standby. When you next switch-on, the following 

message will be displayed: 

TV switched to stand-by 

mode automatically because there was no signal 

for a long time.

” 

Press 

OK

 to continue.

The 

Auto TV OFF

 option(in the 

System

>

Settings

>

More 

menu) may be set to a value between 1 and 8 hours 

by default. If this setting is not set as 

Off

 and the TV 

has been left on and not been operated during the 

set time, it will switch into standby mode after the set 

time has expired. Wh

en you next switch-on 

the TV

, the 

following message will be displayed. 

TV switched to 

stand-by mode automatically because no operation 

was made for a long time.

” 

Press 

OK

 to continue.

TV Control Switch & Operation

1. 

Up direction

2. 

Down direction

3. 

Volume / Info / Sources List selection and 

Standby-On switch

The Control button allows you to control the Volume 

/ Programme / Source and Standby-On functions of 

the TV.

To change volume:

 Increase the volume by pushing 

the button up. Decrease the volume by pushing the 

button down.

To change channel:

 Press the middle of the button 

in, the information banner will appear on the screen. 

Scroll through the stored channels by pushing the 

button up or down.

To change source:

 Press the middle of the button 

in twice(for the second time in total), the source list 

will appear on the screen. Scroll through the available 

sources by pushing the button up or down.

To turn the TV off:

 Press the middle of the button in 

and hold it down for a few seconds, the TV will turn 

into standby mode.

To turn on the TV:

 Press the middle of the button in, 

the TV will turn on.

Notes:

 

Summary of Contents for FL2D6503UH
































Reviews: