F&U DMV9783KUC, Instruction Manual

Page: 30 / 32

When PC-formatted files are stored on the same disc as MP3 files, the
player may play the non-MP3 files with noise or not sound.
Check the files on the disc to ensure that they all correctly formatted.
Error message
Displayed on screen
Player freezes
Press and hold the power button for about 5 seconds to switch off the
player.
Unplug the player for 30 minutes. After turning the power back on, the
player should be reset and function correctly again.
Disc cannot skip
tracks or search
Many discs are formatted not to skip or search, especially during the
initial “ warning” clips.
Single chapter discs cannot skip.
No sound/sound
playback incomplete
or intermittent
Check that the television and/or amplifier have been correctly installed
and connected, and that the appropriate outputs have been selected.
Press Audio on the remote control to skip though the available
soundtracks encoded on the disc.
Press the 5.1CH/stereo button to switch the audio output to match the
television or amplifier.
Check the mute function on the television or amplifier.
There is no sound during reverse play/pause/step/slow or search.
MP3 sound not
playing or
distorting
28
Symptom Cause and remedies
Wrong regional disc:
The loaded disc’s regional code does not match
the player’s regional code.
Wrong password:
The rating level of the loaded disc is higher than the
rating level set for the player. The player will not play the disc until the
correct password is provided.
Wrong disc:
The player has automatic disc quality detection software
installed. When the player detects a damaged disc, it will automatically
play the encoded data at a lower level or not play the disc at all,
depending on the level of damage.