background image

- 1 -

PP-1P 

230 V

Electromagnetic

relay

Electromagnetic relay in housing for direct installation in flush-

-mounted �60 box.

Applying the supply voltage to the relay causes the contact to 

switch to the 2-1 position. This state is indicated by a green LED. 

After a power failure, the contact returns to positions 2-3.

Purpose

Functioning

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Summary of Contents for PP-1P

Page 1: ...ceinthetrashalongwithotherwaste According to the Law on Waste electro coming from households free of charge and can give any amount to up to that end point of collec on as well as to store the occasion of the purchase of new equipment in accordance with the principle of old for new regard less of brand Electro thrown in the trash or abandoned in nature pose a threat to the environmentandhumanhealt...

Page 2: ... Power supply circuit of controlled receiver s connect by con tacts 2 1 NO NC contact For the same power source for relay and controlled re ceiver can perform a bridge between the feed point 4 5 and the input terminal 2 PP 1P 230V is compatible with backlit buttons The same power supply for the transmitter and receiver Mounting Wiring diagram ...

Page 3: ...oad current AC 1 16 A 250 V AC usage category AC 7a activation time max 40 ms deactivation time max 20 ms mechanical durability min 5 10 power indication green LED power consumption standby 0 15 W on 0 6 W terminal 2 5mm screw terminals tightening torque 0 4 Nm working temperature 25 50 C Technical data ...

Page 4: ...ncy and operating conditions For more information visit www fif com pl The F F products are covered by a warranty of the 24 months from the date of purchase Effective only with proof of purchase Contact your dealer or directly with us F F Filipowski sp j declares that the device is in conformity with the essential requirements of The Low Voltage Directive LVD 2014 35 EU and the Electromagnetic Com...

Reviews: