- 2 -
1. Disconnect the power supply.
2. Install the relay in the flush-mounted box.
3. Connect the power supply: N to terminal 6; L to terminal 4
or 5.
4. Power supply circuit of controlled receiver’s connect by con-
tacts 2-1 (NO/NC contact).
For the same power source for relay and controlled re-
ceiver can perform a "bridge" between the feed point
4/5 and the input terminal 2.
PP-1P 230 V is compatible with backlit buttons.
The same power supply for the transmitter and receiver
Mounting
Wiring diagram
