background image

- 1 -

LE-01MR 

v2

Electric energy meter, 

1-phase

MID Directive  

2014/32/EU

Certificate    

0120/SGS0305

The LE-01MR v2 is a static (electronic), calibrated AC single-pha-

se electricity meter for direct current measurement in a 2-wire 

system.

The meter provides 4-quadrant energy and power measurement 

as well as monitoring of many additional network parameters 

such as voltage, current, active power, reactive power, apparent 

power, frequency, power factor. The meter has additional, era-

sable active and reactive energy meters. It is also equipped with 

RS-485 communication interface with Modbus RTU protocol 

support for remote meter reading and configuration. The touch 

button located on the front panel of the meter allows you to 

select the displayed parameter and change the meter settings.

Compliance

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Summary of Contents for LE-01MR v2









Reviews: