domestic and industrial automation
LE-01MR v.2 – User manual v.1.0.0
8
Part 3. Usage
Direct reading of the measured values and configuration of the meter can be accessed via the controls on
the front panel of the display.
Reading field
– LCD digital indicator displaying the
value of the measured parameter.
Button
– touch button. A short press of the button
switches the view to the next displayed parameter.
Long press activates the meter configuration mode.
Pulse indicator
– the blinks of this LED correspond
to the registered increase in active energy con-
sumption. A single blink is equivalent to the con-
sumption of 1 Wh of energy (1000 pulses = 1 kWh).
Measurements displayed on the LCD screen
The LE-01MR v.2 meter allows you to display many values measured and registered by the meter. Switch-
ing to the next parameter is done by short pressing the button located on the front panel of the meter.
By default, the meter is also configured to cycle between measured values.
The list of measurements available from the LCD display is summarized in the table below.
No. Feature
Format
Unit
Symbol
on screen
1 Total active energy
00000.00 (5+2)
kWh
2 Active energy imported
00000.00 (5+2)
kWh
3 Active energy exported
00000.00 (5+2)
kWh
4 Total reactive energy
00000.00 (5+2) kvarh
5 Inductive reactive energy imported
00000.00 (5+2) kvarh
6 Inductive reactive energy exported
00000.00 (5+2) kvarh
7 Resettable auxiliary active energy meter
00000.00 (5+2)
kWh
reset /
