domestic and industrial automation
LE-01MR v.2 – User manual v.1.0.0
16
24
Consumed (imported) reactive power de-
mand
0x180 384
R
2
INT32
var
0.1
25
Maximum consumed (imported) reactive
power demand
0x182 386
R
2
INT32
var
0.1
26
Returned (exported) reactive power de-
mand
0x184 388
R
2
INT32
var
0.1
27
Maximum returned (exported) reactive
power demand
0x186 390
R
2
INT32
var
0.1
List of the configuration registers
To write configuration data to the LE-01MR v.2 meter you can use commands with codes:
•
0x06 – Write Single Register
•
0x10 – Write Multiple Register
If a parameter is written to more than one register, then writing to this parameter must be
done using the Write Multiple Register command and it must include all registers of the pa-
rameter being edited once.
For remote configuration of the meter, it is recommended to use the free
LE Config
software (for PCs with the Windows operating system), available on the
page on the product subpage.
No. Parameter
Address
R/W
Number of regis-
ters
Description
HEX
DEC
1
Serial number of the
meter
0x1000 4096 R/W
6
12-digit meter identification num-
ber. The number is stored as a BCD
number.
For example, a hexadecimal num-
ber in the form 0x123456789012
indicates a meter withe the serial
number 123456789012
2 MODBUS address
0x1003 4099 R/W
1
Meter address in the Modbus RTU
network. Values between 1 and
247 are allowed.
