Monitor memory can store up to 400 photos. If the memory is full, oldest images are
automatically deleted and new ones will be saved in their place.
Automatic saving of photos
After pressing the call button by the guest, the device automatically saves one
photo from the camera after 5 seconds from pressing the button. Switching the monitor
to preview mode will also automatically save 1 photo.
Manual saving of images
After call by the guest or when the preview is enabled, each time you press the
button one photo will be saved.
Viewing photos
After pressing the
button the thumbnails of stored photos will be displayed on
screen. The screen can display up to six thumbnails. To select desired thumbnail, use
or
cursor – thumbnail will be highlighted with yellow border. Pressing the
button will display selected photo in full screen mode. With
or
arrow or you can
browse the previous or next photos in full size or, by pressing the
button, return to
the thumbnail preview.
If no button is pressed for 10 seconds, the monitor automatically returns to
standby mode.
Deleting individual photos
To delete the photos you need to enter the thumbnail preview mode. We choose
the desired thumbnail by highlighting it and by pressing the
button we delete photo.
Photo can also be deleted when it is displayed in full size, also by pressing the
button.
Deleting all photos
Pressing
arrow for three seconds in preview mode will delete all photos
.
MK-10F
24
continued from previous page
MK-08F
Setting the time
Pressing the
button opens the menu window. By pressing the
button the
appropriate number of times we go to the window
Time
- pressing the
or
arrow will
cause the displayed hour to flash - we set the desired hour with arrow, then, by pressing
the
button, we move to the minutes and seconds setting.
To exit this menu press
button or wait 10 seconds without executing any other
operation
.
