- 4 -
②
Press the selected button on a remote control or in
a flush-mounted transmitter.
③
Correct pairing will be confirmed by temporary switching off of the output
circuit and the LED will turn on again.
Each channel of the receiver can be paired with eight different transmitters
(remote buttons). Pairing with more buttons will remove the first entries
made.
Unpairing
To clear the list of transmitters cooperating with the receiver, press the PROG button and hold it
down for at least 10 seconds. Fast flashing of communication LED will indicate that the memory
of the controller has been cleared.
Local buttons
Short press of a button switches the relay in to the opposite state.
Long press of a button (longer than 5 second) activates the relay regardless of the state, in which
the relay was previously in. This feature can be used for synchronizing a group of receivers con-
nected to the same local button. Releasing the button sets the relay in the on position.
Remote buttons
The FW-RC4, FW-RC10 transmitters operate on the principle of a bistable switch: one
press of a button activates the relay; the second press of button deactivates the relay.
The FW-RC5 transmitter also has separate inputs ON (always ON) and OFF (always
OFF).
Due to the nature of transmission and retransmission do not use the same
button in transmitter more often than every 2 seconds. Switching of the re-
ceiver may be carried out with a short delay.
