PURPOSE
The CRT-06 controller is multi-function, programmable electronic
devices which enable control of heating or cooling devices in
order to maintain a stable room temperature, as well as to control
ambient and substance temperatures in industrial conditions,
with the option of supervising technological processes.
CRT-06
CRT-06
www.fif.com.pl
ul. Konstantynowska 79/81
tel/fax 48 42 2270971 POLAND
e-mail: [email protected]
95-200 Pabianice
F&F products are covered by an 24 months warranty from date of purchase
DIGITAL TEMPERATURE
REGULATOR
DESCRIPTION OF CONTROL PANEL:
To work and programming of regulator CRT-06 is use control
panel. It include two line with eight sign on alfanumerical display
and keyboard with five buttons, which is situated under the
display.
In standard work mode on display are present values of
temperaturer which are measure by sensors C1 and C2. If is
connect only one sensors- C1, then at place on display for reprts
from C2 anything is diplaied.
Signs on the left side of display, signalize work mode of regulator
in position of output relay. This sign present:
In programming mode button Return make possible to
return main menu. If button will be push at edition mode,
then program return to main menu without save all
registry. Button Return enable to delete information
abaut errors.
BUTTONS FUNCTIONS:
L1
L2
L3
CRT
N
N
L
CONTROLLERS FEATURES:
- controlling panel use for programming and monitor to work of
regulator
- possibilty of connection two independent temperature probes
PT-100
- two outputs of relay 1P which were attribute to sensors
- control panel for programming and monitoring;
- 10 operation functions;
- 2 independent temperature sensors;
- two independent temperature values may be set;
- 2 x 1P contacts applied to the temperature sensors;
- 2 hysteresis set values, one for each sensor;
- AUTOMATIC mode - operation with one selected function;
- MANUAL mode permanent closing or opening of the contact
without a temperature measurement. Separate temperature
drops for the P1 and P2 contacts.
- memory feature for maximum and minimum temperature values
registered, independent for the C1 and C2 sensors;
- CORRECTION related to the temperature read-out error
against the model thermometer;
- WARNING - visual signalisation of the temperature sensor
failure, range exceed and speed riasing or falling temperature
exceed
- limiting access to program menu using PIN code
- LIGHT selection of display illumination mode.
- LANGUAGE program menu in three languages: Polish, English
or Russian
CRT-05 is equipped to:
CRT-05
OK
OK
Menu
Menu
+125şC
+97şC
Two liness,
with eight sign
alfanumeric
display
Controll
buttons
At programming mode buttons UP and DOWN make to
possibility to select position of menu and to increase or
reduce value of edited parameter.
In programming system mode button OK enable to pass
to selected position from menu and enter the changes.
In standard work button OK is use to change order
temparature T1 and T2 .
Button Menu enable to pass to programming mode of
regulator.
In change order value mode use it cause reconnection
between setting for first and secon sensor.
OK
OK
Menu
Menu
5 9 0 8 3 1 2
5 9 2 7 1 6
+125º
+97º
Reprts from
sensor C1
Reprts from
sensor C1
Position of output
realy P1
Position of output
realy P2
Open joint - automatic work mode
Open joint - manual work mode
Close joint - automatic work mode
Close joint - manula work mode
