Gn
13
g
In
automatic mode
, the meanings of the indications are:
Display
indication
Meaning
0.
Idle position, waiting for a change in the control value or feedback.
1.
Motor sends close.
2.
Motor sends open.
3.
Waiting position after turning on (when controlled via 0-10V or 10-0V).
4.
Waiting position after turning on (when controlled via and I own network; duration is dependent
on the address).
5.
Minimum waiting position after a sending action.
6.
Idle position in which the control is determined by the remote control.
7.
Motor is standing still against a limiting switch.
A.
Stopped closing.
B.
Stopped opening.
C.
Additional delay of 2 seconds after a sending action.
U.
Due to problems, the iM.60 now controls based on the predefined position.
L.
Due to the I/O network going down, the iM.60 now runs independently based on its own
temperature measurements.
