Two post hydraulic lift QJY3.0-E
12
5.2.4 Lowering
During raising and lowering cycles: Closely watch the vehicle and the lift, do not
allow anyone to stay in lift area and make sure the vehicle doors are closed.
1. Remove tools, stands or other objects from lift bay.
2. Turn the main switch to position ON, and the lift is ready for operation.
3. If the safety plate is in the engaged position, briefly raise the lift before lowering.
4. Pull the unlocking steel wire at both columns.
5. Press the unloading handle until lift reaches desired height, the lift stops once the unloading
handle is released. During lowering cycles the support arms automatically stop at a height of
110mm above bottom position.
6. To lower the arms completely, release the unloading handle.
7. Swing arms to full drive-through position and drive the vehicle off the lift.
