Fanaway LD-0003-11/CH/GS, Installation Instructions Manual

Page: 10 / 55

10
better, then securely stick on the weight at this location on the base plate.
3) After balancing the fan, assemble the light dome to the light base.
NOISE:
When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and
frequency signals superimposed in the electricity for off-peak hot water control, may cause a change in fan
motor noise. This is normal. Please allow a 24-
hour “breaking
-
in” period, most noises associated with a new
fan disappear during the time.
The manufacturer’s warranty covers actual faults that may develop and NOT
minor complaints such as hearing the motor run
–
All electric motors are audible to some extent.
CARE AND CLEANING
1) Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth to
avoid scratching the paint finish. Please turn off electricity power when you do so.
2) Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the
possibility of an electrical shock.
3) Motor has permanently lubricated ball bearing. No need to oil
NOTE: Always turn off the power and disconnect the female plug 1 and male plug 1 before attempting to clean
your fan.
WARRANTY CONDITIONS
IN AUSTRALIA / NEW ZEALAND CUSTOMER
–
Please refer to the separated WARRANTY STATEMENT.
IN EUROPE
–
If you are a European Customer Please contact the retail outlet where the fan was purchase for
warranty service.