background image

1

1

 

ATTENTION!

• 

The device must not be exposed to rain or humidity in order to avoid risk of fire and / 

or electric shock. 

• 

Operating room temperature: 15°C - 35°C 

• 

Excessive use may cause health risks. We recommend taking a 5 minute break after 

every 20 minutes of use, and to not drive for more than 2 hours per day.

• 

We strongly advise you to not drive a vehicle immediately after using a video game.

• 

Not intended for children under the age of 6 years old. Contains small pieces which 

pose a choking hazard!

• 

Do not open the casing of the device.

• 

This device contains components that cannot be repaired by the user, opening will 

void the warranty.

 

WARNING!

 Electrical Safety:

The CSL Elite Pedals V2 must be connected to the appropriate wheel base port or PC 

USB port:

• 

If the CSL Elite Pedals V2 becomes damaged in any way, stop usage immediately and 

contact Fanatec

®

 Customer Support: 

Fanatec.com/support/faq

.

• 

All specifications in this document are subject to change. The PC driver and firmware 

of this product may be updated to implement new features or general improvements.

• 

This manual discusses assembly, connections, and functions related to Fanatec

®

 

devices and other additional devices. This is not a replacement manual for the 

other corresponding products! Read the quick guides or user manuals for the other 

products!

• 

The warranty does not include defects that are due to commercial use of the product. 

See chapter “Warranty” at the end of this user manual as well as the Terms & 

Conditions on 

Fanatec.com

 for more details.

GENERAL

1

Summary of Contents for CSL Elite V2





























Reviews: