2
CENTRE CALIBRATION
3
Press the Tuning button and the highlighted
button at the same time. Follow the instructions
on the OLED display.
SHIFTER CALIBRATION
4
TUNING OPTIONS
5
Navigate using the FunkySwitch
TM
Press Tuning button to close Tuning Menu.
Go through parameters
Change parameter values
or
MODES
6
OLED display will temporarily display the
active mode upon selection.
Short press the highlighted
buttons at the same time.
NOTE:
Optional. External H-pattern shifter required.
NOTE:
Repeat process after firmware update.
Press Tuning button
5.2
5.3
3.1
3.2
3.3
Turn to centre
position
Press Tuning button
Press at the same time to calibrate
steering wheel centre.
5.1
Cycle Modes
PC
Consol
e
Repeat
GEAR N
SET N -PRESS
LOW
RIGHT
BTN
