19
The ‘2GS’ indicator shows the activation of the 2GS (two
gears shifter, sequential shifter, SQ) by filling the two little
squares with blue colour, depending on activated shifting
up or shifting down. This can be for example the ClubSport
Static Shifter Paddles (CS SSP) or the ClubSport Shifter SQ
(CSS SQ) in sequential mode if these are not mapped to the
Steering Wheel shifter paddles.
The ‘H-pattern’ indicator shows the activation of the 6GS,
7GS or 8GS (six gears shifter, seven gears shifter or eight
gears shifter) by filling the little squares with blue colour,
depending on activated shifting position. This can be for ex-
ample the ClubSport Shifter (CSS) or ClubSport Shifter SQ
(CSS SQ). Therefore the H-pattern shifter must be calibrated.
See chapter ‘Hotkeys’ ‘Shifter calibration mode’ for more
details
The biggest area in this window is the upper right section of this view. There
is shown a scheme of the attached Fanatec Steering Wheel with all buttons. If
you press one of the buttons on the attached Steering Wheel the correspond-
ing button will be marked with a blue spot as long as the button is physically
activated. Please note that this view is depending on the attached Fanatec
Steering Wheel and also note that for the Universal Hub all button boxes, the
shifter paddles and the FunkySwitch
TM
are shown even if they are not physically
attached. See example picture for the Universal Hub on the right hand below:
