background image

 

10 

 

„

 

Keep the metal detector dry. If it gets wet, wipe it dry immediately. 

        Liquids might contain minerals that can corrode the electronic   

        circuits. 

 

„

 

Use and store the metal detector only in normal temperature 

environments. Temperature extremes can shorten the life of electronic 

devices, damage batteries, and distort or melt plastic parts. 

 

„

 

Keep the metal detector away from dust and dirt, which can cause 

premature wear of parts. 

 

„

 

Handle the metal detector gently and carefully. Dropping it can 

damage circuit boards and cases and can cause the metal detector to 

work improperly. 

 

„

 

Occasionally wipe the metal detector with a damp cloth to keep it 

looking new. Do not use harsh chemicals, cleaning solvents, or strong   

        detergents to clean the metal detector. 

 

„

 

Warranty: This product is warranted against defects in materials and 

workmanship for 5 years from date of purchase. The item must be 

shipped at buyer’s expense to our offices where we will, at our 

discretion, repair or replace it free of charge.    Please include your 

original purchase receipt.    This warranty is not valid for defects 

caused by accidents, misuse, improper care, alteration or abuse, nor 

is it valid if any service or repair is performed by non-authorized 

personnel.  

 

Summary of Contents for MD9300











Reviews: