Faminode H2, User Manual

Page: 21 / 57

TROUBLESHOOTING
CONTACT US
For any inquiries about Faminode products, please feel free to contact us.
We will respond within 24 hours.
Email: cs@faminode.net
Tel: 301-670-7335 (US)
Web: www.faminode.net
Problem
1. The indicator light
does not work when
the power switch is
turned on.
2. The projector does
not turn on when using
the remote control.
3. No image.
4. The projector turns
off automatically.
Possible Causes
◎
The power cable is not connected properly.
◎
The power switch is faulty.
◎
The power switch is turned off.
◎
The remote control has no batteries or the batteries are low.
◎
The remote control is not being aimed at the IR receiver.
◎
The IR receiver is under strong light.
◎
The input source may not be correct.
◎
No input signal.
◎
The input cable is not connected.
◎
When using a laptop, check that the output signal is HDMI1 or HDMI2.
◎
The cooling vents are blocked.
◎
The voltage is not stable.
◎
The projector has overheated. Check that the fan is not broken.
◎
When in PC mode, the PC output frequency is not 50-60Hz.
Make sure that the PC output is connected to the projector.
17
English