Figure D
Master key
Key position mapping 3F Mode 1 key code mapping 00
Remark:
* *
is change mode key
*
Input key position:
<F1> Quit <F2> Set initial code <F3> Set past mode code <F4> Save
to disk
F. Press “F1” to return to main menu.
G. Select 2 to clear Mode 2. Follow the above procedures B-E and all
keys on Mode 2 will become “00” as Figure D.
H. Press “F1” to return to main menu.
I.
Press 5 to quit.
Note: If you want to clear a key and make it become blank, follow the
procedures to program that key with the blank key code “00”.
But the first key is not allowed to be programmed with the blank
key code “00” unless clearing whole table.
20
