<4> Quit
Please select <1-4>:
z
Select 6 for key code table as Figure B, which can be used to
program keyboard. You may print it out when you need a copy of
key code.
z
Select 7 to quit when finishing the programming.
F. Select 1 for programming key code of Mode 1. The computer
monitor will display as below:
Figure A
Master key
Key position mapping 3F Mode 1 key code mapping
Remark:
* *
is change mode key
*
input key position:
<F1> Quit <F2> Set initial code <F3> Set past mode code <F4> Save
to disk
The above figure shows the key position codes on the left mapping.
z
Press F1 to quit and return to main menu.
z
Press F2 to program the whole table of initial key codes (Default
value) for Mode 1 or Mode 2.
See Figure C. This is a whole table batch programming.
10
